Billing Request (Instant Bank Pay feature)

Billing Request Actions

Whenever you create a Billing Request, it will have a list of actions that require completion before it’s possible to fulfil the request.

The possible actions are:

• choose_currency, have the payer choose from a list of supported currencies

• collect_customer_details, collect customer details required for the schemes

• collect_bank_account, create the bank account for the mandate/payment

• bank_authorisation, have the payer authorise the billing request via their bank if required

• confirm_payer_details, confirm customer and bank account details provided by the payer

Once all required actions have been completed, the Billing Request will become ready_to_fulfil, and an integrator can use the fulfil action to create all associated resources.

Which actions should I implement?

Even if integrators complete a selection of actions themselves, Billing Request Flows can be used to complete the remaining actions.

Our recommendations for whether integrators should implement each action are:

• choose_currency, implement this if you want to allow the payer to have the ability to choose a different currency, and you support more than 1 currency.

• collect_customer_details, implement this if you want a white label flow to collect customer details or have already collected the details (pre-filling, etc)

• collect_bank_account, as with customer details, but be aware that Billing Request Flows can avoid this step for certain schemes which can improve conversion by reducing the number of details a payer has to manually input

• confirm_payer_details, As part of scheme compliance, it is a requirement to allow the payer to crosscheck the details entered by them and confirm it.

• bank_authorisation, this can be handled by Billing Request Flows or in Instant Bank Pay via a custom Bank Authorisation creation.

The actions presented on a Billing Request are unordered, but each action may have dependencies, or have other actions depending on it.

These are specified in the fields completes_actions and requires_actions.

Taking a bank_authorisation as an example:

Action status is either pending or completed.

requires_actions: Actions can only be executed if the actions listed in requires_action have been completed- in this example, we can’t complete the bank authorisation until we’ve collected the bank.

completes_actions: Actions can complete other actions, which can help streamline checkout flows. The example shows how a bank authorisation might collect customer details, completing that action as a side effect.

For most integrators, we suggest building flows that process actions in the order of:

1. choose_currency, optional first step as a change in scheme can dictate what customer contact details we collect

2. collect_customer_details, so customer contact details are prioritised

3. collect_bank_account, if it is required and another action won’t complete it

4. bank_authorisation, as the penultimate step before completing the checkout flow

5. confirm_payer_details, only applicable if it is a mandate_request

Action: choose_currency 

Depending on your preference, and if you support multiple currencies you can allow the customer to change their currency to their preferred option for mandate only requests.

As an example, we can create a Billing Request for a GBP mandate:

This returns a Billing Request that looks like this:

Note that

• There is a choose_currency action, which is completed - this is because we have supplied a currency when created the BR, however we still have the ability to change it.

• There is an available_currencies field which has a list of currencies the payer will be able to choose from.

We can complete this action by POST’ing to the Choose Currency for the billing request endpoint:

As with all action endpoints, the response is the Billing Request. What we get back is:

Note that:

• Our Mandate request now has an updated currency and scheme.

Action: collect_customer_details 

Billing Requests aim to create billing resources against a customer, either a mandate (Direct Debit, PayTo or VRPs), an Instant Bank Payment, or both.

Payment schemes vary in what customer details you are required to collect. The collect_customer_details action is about collecting all the details required by either the mandate or the payment scheme, to ensure we meet regulatory needs.

As an example, we can create a Billing Request for a GBP mandate:

This returns a Billing Request that looks like this:

Note that:

• There is a collect_customer_details action, which is pending

• A new customer has been created for us, as the Billing Request wasn’t attached to an existing customer

• The customer and customer_billing_detail resources are presented back to us, and they have no filled fields

The collect_customer_details action is designed to help us collect the required information from our customers.

Taking a closer look at the action:

The collect_customer_details.incomplete_fields object tells us what fields we need to collect, for both resources. Which fields are required changes depending on the schemes of the mandate (or payment).

We can complete this action by POST’ing to the Collect customer details for the billing request endpoint:

As with all action endpoints, the response is the Billing Request. What we get back is:

Note that:

• The collect_customer_details action is now completed, meaning we can move on to other actions

• As a result of us collecting the details, our customer and customer_billing_detail has been populated with the details we collected

Most integrators will collect these details via web forms, filled by their payers. Integrators are expected to build forms that can collect all possible customer and customer_billing_detail fields (see the Collect customer details schema) but only display the inputs required, as per incomplete_fields.

Depending on the scheme, we might need to collect bank account details before fulfilling the Billing Request. An example is a Direct Debit mandate, where we need to capture the payer’s bank in order to create Direct Debit payments against them.

As an example, we have a Billing Request which requires collect_bank_account:

Note that:

• There is a collect_bank_account action that is pending

• We have no links.customer_bank_account, confirming no bank account is attached

We can complete this action by POST’ing to the Collect bank account for the billing request endpoint:

As with all action endpoints, the response is the Billing Request. What we get back is:

Note that:

• The collect_bank_account action is now completed, meaning we can move on to other actions

• As a result of us collecting the bank account, we have created a customer_bank_account resource and you can see the links.customer_bank_account ID has been set

We advise most integrators use Billing Request Flows to complete this action, as the hosted flows will try skipping this action if it can be fulfilled by another (such as bank authorisation).

One of the most complex actions, bank_authorisation means the payer needs to log in to their bank to authorise the Billing Request. All Instant Bank Pay schemes will require this action, while mandate only requests will offer an optional bank_authorisation.

The previous actions may return a bank authorisation in pending state:

Note that:

• There is a bank_authorisation action which is pending

• The action is required - all requests with Instant Bank Payments will require bank authorisation

• The action requires collect_bank_account, as we can only authorise the payment after we have collected bank.

We need to create a Billing Request Flow with the ID of Billing Request we had created earlier in order to proceed with the bank authorisation:

This returns a new flow, which has an authorisation_url you should send to your customer:

Share your authorisation  from the response above via a button on your website, SMS, email, or any other way you like. Payers can then follow the authorisation link which will open the payer’s bank login screen. If opened on a mobile with the retail bank app installed, it’s possible the payer will jump straight into the app to authorise the payment.

The bank authorisation is queryable, and will be updated once the payer authorises/denies the request. Integrators should have their checkout flows poll the Get a Bank Authorisation endpoint until the authorised_at timestamp is set.

Once the authorisation is complete, the Billing Request will update to mark the action as completed:

As part of scheme compliance, we need to ensure the payer was presented with a confirmation screen before fulfilling the Billing Request. All mandate requests will require this action.

As an example, we can create a Billing Request for a GBP mandate:

This returns a Billing Request that looks like this:

Note that:

• There is a confirm_payer_details action that is pending

• The action is required- all mandate requests will require this

• The action requires collect_customer_details and collect_bank_account, as we can only show the confirmation page once these actions are completed.

We can complete this action by POST’ing to the confirm payer details endpoint:

As with all action endpoints, the response is the Billing Request. What we get back is:

Note that:

• The confirm_payer_details action is now completed, and the billing request will change status to ready_to_fulfil.

• This Billing Request can now be fulfilled by POST'ing to the Fulfil a Billing Request Endpoint

We advise most integrators to use Billing Request Flows to complete this action, as information presented in the confirmation screen changes depending on the scheme.

Preventing Breaking changes

In order to automatically receive new features and always remain scheme compliant without having to change your integration, GoCardless will need to adjust actions by adding new actions or making optional actions required. This means it will break your integration if you don’t fall back to Billing Request Flow. Therefore if you are building custom payment pages you needs to Implement the actions you are aware of and want to process.